20% of compressor electricity consumption is wasted through air leaks!
Air Leak Detection Service
Compressed Air Leak Detection Service
Our detection service has helped customers save up to
approx. JPY 15 million
a year
Do you face any of these challenges?
-
Not enough staff or time to check for air leaks
-
Air receiver pressure is low after weekends or holidays
Need to cut electricity costs
-
Can hear air leaking somewhere, but can't find where
-
Leaks that seem harmless tend to be left unrepaired
-
Want to know how much the leaks are costing you
-
Want hard numbers to drive energy saving company-wide
-
Reporting after leak repairs takes too much time
Find out where your factory is leaking air. Start with a free consultation to find the right solution.
Why address compressed air leaks now?
If compressed air leaks are left unaddressed…
Common Locations of Compressed Air Leaks
Compressed air leaks occur throughout a factory, creating losses that are difficult to see.
-
Pressure Regulator -
Valve -
Quick Coupling -
Hose
Want an estimate of your air leak losses?
Quickly estimate the cost of compressed air leaks at your facility.
Air Leak Loss Calculator
Enter values in the yellow fields below to estimate the financial losses caused by compressed air leaks.
-
Step 1
Check your compressor specifications
-
Total compressor rated power
kW
-
-
Step 2
Calculate the electricity used to operate your compressors
-
Compressor operating hours
hours/day
Enter a value from 1 to 24 hours. -
Annual factory operating days
days/year
Enter a value from 1 to 365 days. -
Compressor utilization rate
%
Enter a value from 1 to 100%.
-
-
Annual compressor electricity consumption: {{ result1.toLocaleString('en-US') }} kWh/year
-
Step 3
Calculate the electricity wasted through air leaks
-
Air leak rate
%
-
-
Air leaks in factories are commonly estimated at 10–20% of air consumption. Try 20% if you can hear air leaking in your factory, or 10% if you cannot hear it.
-
Electricity wasted through air leaks: {{ result2.toLocaleString('en-US') }} kWh/year
-
Step 4
Estimate the financial loss caused by air leaks
-
Electricity rate
JPY/kWh
-
-
Estimated annual air leak losses at your factory: JPY {{ result3.toLocaleString('en-US') }}/year
Detection Service Features
Visualize × Quantify × Reduce Workload
An integrated service to find air leaks and take prompt corrective action
-
Feature 1
Visualize Compressed Air Leaks
- Locates leaks using a specialized acoustic imaging camera
- Can inspect elevated and hazardous areas
- Detects leaks of nitrogen, oxygen and carbon dioxide as well as compressed air

-
Feature 2
Quantify Compressed Air Leaks
- Reports leak rates, financial losses and CO₂ emissions
- Recommends repair priorities using data to identify the most effective cost-saving opportunities
- Helps raise energy-saving awareness within your organization
-
Feature 3
Reduce Workload and Improve Inspection Efficiency
- A Fluke-certified inspector visits your site to inspect a large area in a short time
- No need to assign a dedicated in-house specialist, reducing your team's workload
- Supports ISO 14001 and decarbonization initiatives
Find out where your factory is leaking air. Start with a free consultation to find the right solution.
ENIMAS × Air Leak Detection: Predict and Verify
Monitor electricity use to spot waste early
Are your compressors using more electricity than expected?
Compressed air leaks are often a major cause.
Start by monitoring compressor electricity consumption with ENIMAS to identify potential signs of air leaks before inspection.
When to Use ENIMAS: Before and After Inspection
-
Before Inspection
- What It Does
- Monitor compressor electricity consumption
- Purpose
- Understand current energy waste and potential signs of air leaks
-
After Inspection
- What It Does
- Measure electricity consumption again after repairs
- Purpose
- Demonstrate and report improvement results with clear figures
After air leak inspection and repairs, ENIMAS also helps verify the benefits. Use it both to understand baseline conditions and to confirm improvement results.
What Is ENIMAS?
ENIMAS is a compact measurement unit that attaches to an equipment power cable to visualize changes in electricity consumption. No specialist knowledge is required, and it can be introduced alongside air leak inspection.
What changed at companies using ENIMAS?
These are success stories from ENIMAS users, not installations carried out by KYOWAKIKO.
Air Leak Detection Service — Pricing Plans
Prices apply to inspections in Japan. For sites outside Japan, please contact us to discuss.
- 1 Inspection Area
- 2 Site Conditions
- 3 Options
-
1 Inspection Area — Base Fee
- Indicative Price
-
From JPY 99,000(excluding tax)
- Included Services
- Pre-inspection consultation; on-site air leak inspection; inspection report
Travel and accommodation expenses apply to remote locations.
-
2 Site Conditions — Pricing varies with piping layout and equipment conditions
- Factory Layout / Piping Density
- Pricing varies with the type and number of machines to be inspected and any work at height, which can increase inspection time.
- Compressors: Number, Output and Layout
- More compressors or higher output can increase inspection time and affect pricing.
Pricing also varies with the inspection area.
-
3 Optional Services — Choose additional support such as re-inspection
- Post-repair re-inspection
- From JPY 50,000 (excluding tax)
Combined Package
Compressed Air Leak Detection × ENIMAS: Three-Month Package
- Add three months of ENIMAS rental to the standard air leak detection service at a special price
- Identify potential electricity waste before inspection and verify improvements afterward
- More companies are choosing to purchase ENIMAS for continued use after the package period
Limited-time offer: 8% off the regular JPY 62,500 rental price
- Air Leak + Power Monitoring Package
- Air leak detection service fee
+ENIMAS Special Package
JPY 57,500(shipping included; excluding tax) - Three-month rental of the ENIMAS unit. The rental period starts on the date of delivery. Units are also available for purchase; please contact us.
From professional inspection to ongoing in-house checks — Fluke acoustic imaging cameras are also available for purchase.
We recommend using our detection service to understand your leaks before deciding which equipment to purchase.
Fluke Industrial Acoustic Imaging Cameras
Full-featured models for visualizing air leaks across your factory and supporting routine inspection and maintenance.
*1 Depends on ambient conditions.
*2
- LeakQ™: Estimates leak severity, leak rate and leak cost.
- PDQ Mode™: Classifies partial discharge types and estimates severity.
- MecQ™: Detects mechanical anomalies.
Need detailed product information and specifications?
Find detailed information on each model in our Fluke product catalog.
Recommended for companies that want to:
-
bring routine inspections in-house
-
monitor multiple machines continuously
-
support maintenance and energy-saving activities
Fluke iSee™ Mobile Acoustic Camera — ii01
Model#: FLUKE-II01/JP
A compact model that connects to your smartphone for convenient air leak checks on site.
Key Features
- 16 high-precision MEMS sensors visualize and quickly locate sound sources
- Covers frequencies from 2 kHz to 48 kHz
- Displays dB readings in real time while detecting leaks
- Connects directly to your smartphone for immediate on-site checks
- Lightweight and compact for portability and daily inspections
- Saves photos and videos for sharing site conditions and recording inspections
Recommended for companies that want to:
-
carry out quick checks during daily inspections
-
start with an easy-to-use solution
-
capture and share images on site
We can help select the right model. A Fluke-certified inspector recommends equipment based on your application and operating environment.
Please contact us separately about post-purchase training and on-site support.
Looking for other Fluke measuring instruments?
KYOWAKIKO supplies a wide range of Fluke products, including acoustic imaging cameras. Search by product category, industry or keyword to find the right equipment for your application.
Find out where your factory is leaking air. Start with a free consultation to find the right solution.
How much could your factory be losing? Explore our air leak loss examples.
-
CASE 01
Metalworking
Floor area: 3,500 m²
Inspection fee: JPY 100,000
Leak locations: 37Estimated annual loss:
JPY 2,800,000 -
CASE 02
Foundry
Floor area: 3,800 m²
Inspection fee: JPY 180,000
Leak locations: 41Estimated annual loss:
JPY 1,150,000 -
CASE 03
Automotive (large plant)
Floor area: 7,000 m²
Inspection fee: JPY 280,000
Leak locations: 118Estimated annual loss:
JPY 20,400,000 -
CASE 04
Food Processing
Floor area: 24,000 m²
Inspection fee: JPY 350,000
Leak locations: 101Estimated annual loss:
JPY 810,000 -
CASE 05
Chemicals
Floor area: 2,900 m²
Inspection fee: JPY 400,000
Leak locations: 52Estimated annual loss:
JPY 1,100,000 -
CASE 06
Ceramics
Floor area: 6,000 m²
Inspection fee: JPY 400,000
Leak locations: 63Estimated annual loss:
JPY 3,900,000 -
CASE 07
Chemicals (large plant)
Floor area: 22,000 m²
Inspection fee: JPY 450,000
Leak locations: 66Estimated annual loss:
JPY 1,750,000 -
CASE 08
Chemicals (large plant)
Floor area: 30,000 m²
Inspection fee: JPY 500,000
Leak locations: 81Estimated annual loss:
JPY 2,660,000 -
CASE 09
Steel
Floor area: 40,000 m²
Inspection fee: JPY 800,000
Leak locations: 179Estimated annual loss:
JPY 8,200,000 -
CASE 10
Machinery Manufacturing
Floor area: 8,000 m²
Inspection fee: JPY 400,000
Leak locations: 62Estimated annual loss:
JPY 2,400,000 -
CASE 11
Metalworking
Floor area: 5,000 m²
Inspection fee: JPY 250,000
Leak locations: 87Estimated annual loss:
JPY 900,000 -
CASE 12
Semiconductors
Floor area: 7,000 m²
Inspection fee: JPY 400,000
Leak locations: 47Estimated annual loss:
JPY 1,400,000
Find out where your factory is leaking air. Start with a free consultation to find the right solution.
Case Studies
Success Stories from Our Customers
-
Addressing air leaks enabled this customer to shut down one compressor.

CASE 01
Metalworking
Financial loss: JPY 3,689,798/year
Estimated CO₂ emissions: 66,827 kg/year-
Inspection Time
0.5 day
-
Inspection Area
Approx. 4,000 m²
-
Leak Locations
104
-
-
Quantifying losses greatly increased energy-saving awareness within the company.

CASE 02
Food Processing
Financial loss: JPY 5,024,177/year
Estimated CO₂ emissions: 94,832 kg/year-
Inspection Time
1 day
-
Inspection Area
Approx. 10,000 m²
-
Leak Locations
139
-
-
Despite staff shortages, using the service led to major progress in energy-saving activities in a short time.

CASE 03
Machinery Manufacturing
Financial loss: JPY 1,183,481/year
Estimated CO₂ emissions: 15,891 kg/year-
Inspection Time
1 day
-
Inspection Area
Approx. 30,000 m²
-
Leak Locations
179
-
Find out where your factory is leaking air. Start with a free consultation to find the right solution.
How It Works
Please contact us using the inquiry form. A member of our team will respond within one business day.
Contact us now for free advice on air leak inspection
-
Consultation
01
We review your equipment and challenges
-
Quotation
02
We propose the best plan
-
Inspection
03
We visit your site and inspect for leaks
-
Report Delivery
04
We provide detailed data on leak locations, losses and more
-
Follow-up Support
05
We advise on repairs and routine inspections
Frequently Asked Questions
-
Can you inspect accurately despite surrounding factory noise?
Air leak sounds occupy a different frequency range from normal factory operating noise. By detecting frequencies characteristic of air leaks, inspection can be carried out while the factory is operating.
-
How much area can you inspect in one day?
The area we can inspect depends on air consumption, the number of machines and piping density. We discuss these conditions with you in advance and provide a quotation.
-
Is the service cost-effective?
Our customers tell us the service offers good value for money. We ask about the inspection area and compressor operating conditions to recommend the plan that best suits your needs.
-
Can you inspect steam leaks?
Steam piping is normally covered with insulation. To pinpoint a leak accurately, the insulation needs to be removed.
-
Can you detect leaks other than compressed air?
The same detection method generally applies to gases such as nitrogen, argon and oxygen. Vacuum leaks in systems operating below atmospheric pressure can also be detected.
-
Can the camera be used for leak-tightness (airtightness) testing?
Very small leaks, including slow leaks that only produce tiny bubbles in a bubble test, may not be detected. The absence of a detection does not guarantee that a system is completely leak-free, so we do not recommend this method as the final basis for a leak-tightness test.
-
Is a preliminary site survey required?
If you provide drawings of the inspection area and information such as compressor capacity, and we can meet online, we can prepare a quotation without a preliminary site visit.
-
Can you inspect outdoors?
Yes, but our inspection equipment is not waterproof, so we cannot inspect in the rain. For outdoor inspections, we may ask you to set aside a backup date in case of bad weather.
-
Is the inspection equipment explosion-proof?
No. Our inspection equipment is not explosion-proof.
Find out where your factory is leaking air. Start with a free consultation to find the right solution.



