Compressed Air Leak Inspection

HomeServicesFacility SolutionsCompressed Air Leak Inspection

Do you face any of
these challenges?

Not enough staff or time to inspect for compressed air leaks
Air receiver pressure drops over weekends or holidays
You want to reduce electricity costs

Leaks that seem harmless are often left unrepaired
You want to know the scale of your losses
You want to use clear figures to raise energy-saving awareness across your organization

Considering action on
compressed air leaks?

Request a Quotation Request Information

Why address compressed air leaks
now?

If compressed air leaks are left unaddressed…

Of a factory's electricity costs,
10% may be wasted

JPY 15 million per year
in losses

Staff shortages
make time-consuming
inspections harder to manage

Higher CO₂ emissions
undermine your
decarbonization targets

Common Locations of Compressed Air Leaks

Compressed air leaks occur throughout a factory, creating losses that are difficult to see.

Pressure Regulator

Valve

Quick Coupling

Hose

Want an estimate of
your compressed air leak losses?

Quickly estimate the cost of compressed air leaks at your facility.

Compressed Air Leak Cost Estimation Worksheet

Inspection Service Features

Find leaks and take prompt corrective action
with our integrated service

Visualize×Quantify×Reduce workload

Visualize Compressed Air Leaks

Locate leaks using a specialized acoustic imaging camera
Inspect elevated or hard-to-reach areas from a distance (excluding hazardous areas requiring explosion-proof equipment)
Detect leaks of nitrogen, oxygen and carbon dioxide as well as compressed air

Quantify Compressed Air Leaks

Report leak rates, financial losses and CO₂ emissions
Recommend repair priorities using data to identify the most effective cost-saving opportunities
Help raise energy-saving awareness within your organization

Reduce Workload and Improve Inspection Efficiency

A Fluke-certified inspector visits your site to inspect a large area in a short time
No need to assign a dedicated in-house specialist, reducing your team's workload
Support ISO 14001 initiatives and decarbonization measures

Monitor electricity consumption
to identify early signs of waste
ENIMAS × Compressed Air Leak Inspection
Anticipate losses and verify improvements

Your factory's compressor electricity consumption is
higher than expected

Compressed air leaks are often a major cause.

Start by monitoring compressor electricity consumption with ENIMAS
to identify potential signs of compressed air leaks before inspection.

Two Ways to Use
ENIMAS

Before Inspection

What It Does

Monitor compressor electricity consumption
Purpose

Understand current energy waste and potential signs of air leaks

After Inspection

What It Does

Measure electricity consumption again after repairs
Purpose

Demonstrate and report improvement results with clear figures

After compressed air leak inspection and repairs, ENIMAS also helps verify the benefits.
ENIMAS supports both baseline assessment and verification of improvements.

Considering action on
compressed air leaks?

Request a Quotation Request Information

Service Plans

Prices and offers shown apply to inspections in Japan. For sites outside Japan, availability, scope, schedule and costs are discussed case by case.

1Inspection Area

＋

2Site Conditions

＋

3Options

Basic Plan

1Inspection Area: Base fees depend on the area to be inspected

Indicative Inspection Area	Indicative Price	Included Services
From approximately 2,000 m²	From JPY 75,000 (excluding tax)	Pre-inspection consultation On-site compressed air leak inspection Inspection report

Indicative Inspection Area
From approximately 2,000 m²
Indicative Price
From JPY 75,000 (excluding tax)
Included Services
Pre-inspection consultation On-site compressed air leak inspection Inspection report

＋

2Site Conditions: Pricing varies with piping layout and equipment conditions

Factory Layout / Piping Density	Compressors: Number, Output and Layout
Pricing varies with the type and number of equipment items to be inspected and any work at height, which can increase inspection time.	More compressors or higher output can increase inspection time and affect pricing.

Factory Layout / Piping Density
Pricing varies with the type and number of equipment items to be inspected and any work at height, which can increase inspection time.
Compressors: Number, Output and Layout
More compressors or higher output can increase inspection time and affect pricing.

＋

3Optional Services: Choose additional support such as post-repair reinspection

Post-repair reinspection
From JPY 50,000 (excluding tax)

Combined Package

Compressed Air Leak Inspection × ENIMAS: Three-Month Package

Limited-time offer: 8% off the regular JPY 62,500 rental price

Add three months of ENIMAS rental to the standard air leak inspection service at a special price
Identify potential electricity waste before inspection and verify improvements afterward
More companies are choosing to purchase ENIMAS for continued use after the package period

Air Leak & Electricity Dual-Visibility Package
Three-month rental of the ENIMAS unit. The rental period starts on the date of delivery. Units are also available for purchase; please contact us.	JPY 57,500 (shipping included; excluding tax)

Considering action on
compressed air leaks?

Request a Quotation Request Information

Inquiry forms, reference materials and linked Japanese website pages are in Japanese. Prices are in Japanese yen. Prices and offers shown apply to inspections in Japan. For sites outside Japan, availability, scope, schedule and costs are discussed case by case.